How to make a simple clay model

Clay model making tools used

Required: foam, clay, cardboard, clay tools, spray paint, saw, clay oven, plastic gloves

Clay model making method

1, First make a rhino model, and export its six views, six views according to the size of the model you need to print, get six views drawings

2. Cut the outline of the six views with scissors, paste it on the foam with glue, and stack the foam with glue if the height is not enough. Where there is an arc, make a card with hard cardboard

3. Use a knife to cut the outline of the model according to the outline lines of the six views.

4, because the clay is relatively hard, so we need to use a saw to cut the clay, cut the clay into small pieces, and then put it in the oven to melt.

5. Wear plastic gloves and evenly cover the heated clay on the foam.

6. Use clay tools to trim the model, and cover the parts with paper and double-sided tape where the color is different from the main body.

7, paint it with spray paint, paint three times, first on the white primer, and then on the expected color of the spray paint, and finally on the varnish, the varnish is colorless, can prevent the colored paint from falling off.

8. Remove the paper and paint the unpainted area with paint.

Precautions during clay model making:

The smell of clay and spray paint is strong, and you should wear a mask when making models

When spraying paint, you can not only spray in one place, a little distance, and spray back and forth